Senco FramePro 602 Full Round Head Sequential Nailer Review Introduction: The Senco FramePro 602 is designed for comfort as well as nailing speed. It has an easily adjustable depth of drive feature and drives smooth shank nails from 2 to 3-1/2 inch long ring shank nails from 2 to 3 inch long. The nailer is easy to use and its magazine is shorter allowing the user a better line of sight when operating the nailing gun.
Senco FramePro 602 Full Round Head Sequential Nailer Technical Details
- Nailgun application: framing
- Nailgun type: Pneumatic
- Operating pressure: 80 to 120 psi
- Operating power: 869 inch per pounds
- Weight: 8.4 pounds
- Length: 13.25 inches
- Width: 4.17 inches
- Height: 20.00 inches
- Nail types: smooth or ring type shanks from 2 to 3-1/2 inch long, round or flat head, wire collated
- Payload: up to 75 nails
- Delivers the necessary power to drive nails into almost any kind of wood, including engineered lumber
- Designed for comfort and ease of use with better balance
- Delivers consistent power no matter how many nails are shot
- Dry fire lockout
Senco FramePro 602 Full Round Head Sequential Nailer Review
The Senco FramePro 602 nailer is one of the more stick nailing guns on the market. It is easy to handle and has a contoured, soft grip handle for comfort and its light weight helps to minimize arm, hand and shoulder fatigue, especially when operating the nailer for hours at a time. The exhaust vent is easily adjustable to keep the discharge of air and matter away from the work area and the users face. The depth of drive is also easily adjustable with a push button system. The depth of drive can be adjusted easily, on the fly and even while wearing work gloves. That saves down time while keeping production and efficiency high.
The professional contractor and remodeler find the Senco FramePro 602 nailer efficient and the right nailer for the job most of the time. The weekend home improvement warrior will appreciate the accuracy of the nailer and the added safety features such as the dry fire lockout capability.
The Senco FramePro 602 nailer is effective when framing, fencing, truss assembly, decking, subfloors and joist and rafter work. The nailer is bound to be the gun most often called upon to fulfill all the necessary framing needs. It does not matter if the project is big or small, the Senco FramePro 602 nailer is just right for any and all framing applications.
The Senco FramePro 602 is especially helpful when toe nailing in place. The toe nail tip has a saw tooth tip to grip the wood, without damaging the surface, and prevent slipping when driving the nails. The nailer accommodates smooth and ringed shanks in variable lengths to cover all applications.
The Senco FramePro 602 nailer works with any capacity compressor and works as efficiently with a 3 gallon compressor as it does with a 30 gallon compressor. The Senco FramePro 602 is also equipped with a male quick connector, twist on connection with a pressure removal connector. Only use the prescribed connections and tubing when operating the Senco FramePro 602 nail gun.
” I bought this nailer a couple of weeks after hurricane Katrina in preparation for the work ahead rebuilding some of my house. I’ve driven about 4000 nails and it has worked flawlessly. I’ve framed walls, hung sheathing, nailed decks and rafters. It has set every nail from 2″ to 3 1/4″ with no problems. I’ve also nailed some ceiling joist when the wood was too old/hard to nail by hand … no problems. I have not tried 3 1/2″ nails yet but from the performance I’ve experienced so far, I don’t expect those to be a problem.
The nailer has double fired on a couple of occasions but I was in tight situations where my arm movement was restricted and I’m sure that was the cause. I’ve read some really good reviews about Hitachi nailers but if I had it to do over I would buy the Senco FP602 again. I highly recommend this gun. ”
By J. Krebs, USA
A final Comment about the Senco FramePro 602 Full Round Head Sequential Nailer
The Senco FramePro 602 provides the power necessary to tackle just about any framing job, using almost any kind of lumber. The streamlined designed makes the Senco FramePro 602 efficient and easy to use. It can be used effectively by professionals as well as the everyday home improvement fan. The built in safety features such as the dry fire lock and the adjustable air vent takes away some level of danger while using the nailer. That doesn’t mean the user can just set caution and safety aside when using the nail gun. It means there are additional ways in place to help keep the user safe from injury.
The Senco FramePro 602 is often identified as the work horse of the tool box as it is the one tool that can fill multiple capabilities. The ease of filling the magazine and adjusting the nail depth drive makes the Senco FramePro 602 one of the more efficient nail guns on the market.