Best Finish Nailer

The approach that we’ve taken to establish the best finish nailer is to summarize the key features for each of them. Then to compare and contrast between the different products – that limits the amount to focus on. Then we delve a bit deeper at a  product level to determine the ideal one for the job in hand.

Finish nailers obviously come in a whole range of gauges that’ll accommodate various lengths of nails. So that’s our starting point! The 1st table below enables us to find the best finishing nailer by first deciding upon the gauge that’s required and then the nail lengths and then the other features. We’ve got 15 gauge, 16 gauge, 18 gauge and 19 gauge finishing nailers covered. Of course if you want to start at nail length, then simply scan the column 3 (Nail Size) then decide upon the Gauge that you want.

And different finish nailers are powered by a range of different systems – pneumatic (air) finish nailer which is handy if you already have a spare compressor lying around, electric (rechargeable battery) finish nailer and cutting edge fusion finish nailers.


Best Finish Nailers Essential Facts – Comparison Table

15 Gauge NailersTypeNail Size Nail CapacityDimentions (inches)WeightWarrantyNotesRating
Bostitch N62FNK-2Air*1" - 2 ½"1304.25 x 14.6 x 16.53.8 lbs........8/10
Dewalt D51276KAir*1" - 2 ½"1003.5 x 11.5 x 136.9 lbs5 YearsInc's. 1000 x 2' inch nails8/10
Dewalt DC628KBattery (Inc)1 ¼" - 2 ½"1105 x 12.5 x 13.88.8 lbs3 YearsIntegrated LED lights8/10
Hitachi NT65MA4Air*1-1/4" - 2-1/2"1004.25 x 15 x 174.2 lbs....Feature rich9/10
Porter Cable DA250CAir*1" - 2 ½"1009.75 x 10.42.6 lbs........10/10
Senco FinishPro 42XPAir*1 ¼" - 2 ½"1045.5 x 16 x 17.54.5 lbs5 YearsFeature rich9/10
Senco FN65DAFusion1 ¼" - 2 ½"1103 x 13 x 13.56.1 lbs2 Years....10/10
16 Gauge NailersTypeNail SizeNail CapacityDimentions (inches)WeightWarrantyCommentsRating
Dewalt D51257KAir*1" - 3-1/4"1003.5 x 10.6 x 11.83.85 lbs3 YearsIncs 1000 x 2 inch nails10/10
Dewalt DC616KBattery (Inc)1½" - 2 ½"110 7 x 15.2 x 18.508.5 lbs3 YearsIntegrated LED lights9/10
Dewalt DC618K XRPBattery (Inc) 1-1/4" ? 2-1/2"1207 x 15.25 x 18.58.5 lbs3 YearsIntegrated LED lights9/10
Paslode 900600Fuel Cell1¼" - 2 ½"1003-1/4 x 10-3/4 x 11-1/44.9 lbs1 YearsCordless9/10
Paslode 902000Fuel Cell¾" – 2 ½"1004 x 11 x 11.84.9 lbs1 YearsCordless10/10
Paslode T250AAir**1 ¼" - 2 ½"1005.5 x 18 x 17.53.8 lbs1 Years....8/10
Porter Cable FN250CAir*1" - 2 ½"10015.4 x 5 x 15.33.85 lbs........9/10
18 Gauge NailersTypeNail SizeNail CapacityDimentions (inches)WeightWarrantyCommentsRating
Paslode 901000Fuel Cell5/8" - 2"1003 1/2 x 11 x 11 1/24.9 lbs1 YearCordless9/10
19 Gauge NailersTypeNail.SizeNail CapacityDimentions (inches)WeightWarrantyCommentsRating
Bostitch FN1664KAir*¾" - 2 ½"1005.2 x 13.8 x 14.23.4 lbs....Inc's 1000 x 2 inch nails9/10

* Operating Pressure 70 – 120 PSI
** Operating Pressure 80 – 120 PSI

As you can see, all of the finishing nailers that we have rate in the range of 7/10 to 10/10. Now lets identify the best finish nailers according to the various 15, 16, 18, and 19 Gauge tables that follow. And if you really need it you can read the full product review – see bottom of page for necessary product review links.

If you are new to Top Nailer Reviews then you should know that we only focus on and review 4 and 5 star products. So all of the ‘best finishing nailers’ here are great products – it’s simply a matter of deciding what you choose for your project.

Best 15 Gauge Finish Nailer

Overall the best 15 gauge finish nailer is the fusion powered Senco FN65DA F-15 15 GA. There are plenty of reasons why, not least of which it is cordless! It weights in at 6.1 lbs, which although not the lightest of the 15 gauge fininshing nailers (that’s the Porter Cable DA250C) it’s certainly bearable. It has LED nose lighting for working in restricted light conditions such as cupboards and lends itself to a host of projects including casing doors and windows, trimming, base boards and paneling.

Check out the Senco FN65DA F-15 15 GA here


If you already have a compressor then you’ll probably be considering a 15 gauge pneumatic fininshing nailer. If that’s the case then you might want to get the super lightweight (but durable) Porter Cable DA250C. At a mere 2.6 lbs you’ll literally be able to work all day before your arms give up!

Check out the Porter Cable DA250C here


Another pneumatic 15 gauge nailer that’s worth considering is the Hitachi NT65MA4 nail gun. It is a bit heavier than the DA250C – it weighs 4.2 lbs, but comes with a few extra features that you might find useful. For instance, it includes a completely integrated air duster, perfect for clearing debris on the work surface. The NT65MA4 also features a 360 degree adjustable exhaust port, ensuring you do not cover your self or project in wood dust.  For more info…

Check out the Hitachi NT65MA4 here


And finally, if neither a pneumatic 15 gauge finish nailer nor the fusion powered Senco FN65DA appeal, then you should get the battery powered DeWalt DC628K XRP. Including battery, this cordless finish nail gun weighs in at 8.8 lbs. The battery can be fully charged in just one hour and will work continuously for a full day before it needs to be recharged. Naturally if you intend working on a rota, then grab yourself an extra battery!

Check out the DeWalt DC628K XRP here


Finish Nailer ModelNailer Product Summary
Bostitch N62FNK-2 Review
Bostitch N62FNK-2

The lightweight Bostitch N62FNK-2 finish nailer is perfected for adding the finishing touches on any of your carpentry projects. The versatile 15 gauge nailgun is perfect for wide variety of jobs such as trim and molding work. The extremely light and nimble N62FNK-2 will easily squeeze into tricky places with ease.

The Bostitch name is known for quality with a warranty to match. However, the construction of the magazine leaves something to be desired. Due to its plastic construction we are interested to see if this model will stand up to the rigors of construction use. However, the seven-year warranty should put most consumers concerns to ease. Also the only suitable finishing nails that would work with the gun seem to be Stanley or Bostitch. Over all it seems to be a good value unit for enthusiasts alike.

Click here for availability

DEWALT D51276K Finish Nailer Review
Dewalt D51276K

The newest offering from yellow brand of tools, the Dewalt D51276K finish nailer is an excellent designed finish nailer well equipped to take on any carpentry project. Powered by compressed air and pneumatically driven, the D51276k delivers plenty of power, enough to sink nails into the toughest materials like white oak.

With a great price a nice list of features, this is a favorite among many wood workers looking for a 15 gauge finishing nailer. A nice 5 year warranty ensures you won?t be running back to the hardware store nine months later purchasing a new model. Once you fire the Dewalt D51276K nailer, you?ll understand how solid and well built this nailer is. It?s important that you only buy Dewalt brand nails as others are not compliant, such as the Senco brand. The kit includes 1000 x 2 inch finishing nails and a carrying case. This is a great little nailer, and a fine addition to anyone?s tool arsenal.

Click here for availability

DeWalt DC628K Review
Dewalt DC628K

The DeWalt DC628K XRP 1-1/4-Inch to 2-1/2-Inch 15-Gauge 34 Degree Angled Finish Nailer, has been designed for use by the professional, but is also ideal for use by the amateur. This battery powered heavy duty nail gun delivers all the punch without the use of an air compressor, so no air hoses to get in the way and being cordless, no trailing wires either.

The tool free depth selector with 6 settings and tool free ?jam? clearing reduces downtime. With the ability to choose between two operating modes, single nail shot or rapid fire, gives control and accuracy, built in LED lamps, makes working in darker areas safer and easier.

A heavy duty, versatile and The De Walt DC628K XRP Finish Nailer has been designed to make short work of the toughest jobs and provide the professional finish your reputation relies on.

Click here for availability

Hitachi NT65MA4 Review
Hitachi NT65MA4

The Hitachi NT65MA4 Finish Nailer is perfect for putting the finishing touches on any project. The more than reasonable price combined with its unique collection of features make the NT75MA4 perfect for the hobbyist to professional.

The Hitachi NT65MA4 nail gun offers a lot of luxury features at an incredible price point. The pneumatic powered nailer is powerful enough to tackle any job from the home front to the job site. The high capacity magazine holds 100 nails and accepts nail lengths from 1-1/4 to 2-1/2 inches.

It also boasts a nice list of features you normally do not see on a nail gun. For instance, this nailer includes a completely integrated air duster, perfect for clearing debris on the work surface. The NT65MA4 also features a 360 degree adjustable exhaust port, ensuring you do not cover your self or project in wood dust.

So if you are searching for a new finish nailer, look no further. We think you might just fall in love with all the features the NT65MA4 has to offer.

Hitachi NT65MA4

Porter Cable DA250C ReviewPorter Cable DA250C

The Porter Cable DA250C 1 Inch to 2 � Inch 15-Gauge Angled Finish Nailer, this super lightweight nailer weighs just 2.6 pounds, but is able to pack a punch, making it an ideal choice for both the professional and the DIY?er.

This pneumatic nail gun operates at operates at 70-to-120 PSI, and is able to deliver nails time after time for all sorts of wood working and construction tasks around the work site and the home.

The tool free adjustable exhaust area keeps the work free from dust and debris, and the no mar nose helps project the work area from damage, the protective no mar nose can be removed and stored on the nail gun should it be required.

The oil free motor saves the work area from being stained by oil. The oil free motor also saves on expensive maintenance costs and increases the life of the motor. The DA250C nailer is ideal for crown moldings, final trims, door jambs etc., and the sequential firing makes short work of the biggest of jobs.

Investing in the Porter-Cable DA250C Finish Nailer, could prove to be a very wise decision, its light weight but durable robust design is ideal for all kinds of jobs around the house and on the work site. At just 2.6 lbs. its light enough to work with all day without suffering from aching muscles and fatigue. In common with other DA250C reviews, we believe that this would be an astute purchase.

Click here for availability

Senco FinishPro 42XP ReviewSenco FinishPro 42XP

The pneumatic Senco Finishpro 42XP is designed for the rigors of professional use. The lightweight Magnesium body and bag full of features put this in the crosshairs of many consumers. It will drive 15 gauge finish nails ranging in length from 1.25 inches to 2.5 inches in the hardest types of woods, even white oak. The Finishpro 42xp makes quick work of base molding, window casings, exterior trim, cabinets, crown molding, and more.

The Senco brand provides quality tools at a more then reasonable price. The 5 year warranty is a nice addition to the package as well. We were very keen on how powerful this lightweight unit was to so other finish nailers. Make no mistake, this is a professional quality tool. There?s really not much negative to say about the product, you can?t go wrong with the 42XP.

Click here for availability

Senco FN65DA ReviewSenco FN65DA

The Senco FN65DA F-15 15 GA Fusion Finish Nailer provides all the power without the added restrictions of air hoses or cables, thanks to the Li-ion battery. This 15 gauge finish nail gun has a robust aluminum drive cylinder and the added benefit of a patented reflex shot.

With LED nose lighting the Senco FN65DA is ideal for use in areas where there is restricted light, such as in a cupboard or closet. The Senco FN65DA F-15 has been constructed to cope with the demands of the professional arena and provide all the kick and punch needed to satisfy the day to day demands and challengers put on the nailer by the professional.

Professionals have found the Senco FN65DA F-15 Nailer the ideal nail gun for many of the situations they find themselves coping with including casing doors and windows, trimming, base boards and paneling, this nailer is certainly up to the challenges the professionals can throw at it. And the senco fn65da price is extremely reasonable!

Click here for availability


15 Gauge Finish Nailers Reviews

Here are all the 15 gauge finish nailer reviews if you want to visit them separately:

Bostitch N62FNK-2 Review
Dewalt D51276K Review
Dewalt DC628K Review
Hitachi NT65MA4 Review
Porter Cable DA250C Review
Senco FinishPro 42XP Review
Senco FN65DA Review

Best 16 Gauge Finish Nailer


Finish Nailer ModelNailer Product Summary
Dewalt D51257K
Dewalt D51257K

At around $150 dollars the Dewalt D51257K finishing nailer is in anyone?s budget for any job. Dewalt, a big name in the tool industry, incorporates new technology that allows the D51257K nailer to be run with or with out oil. The light weight, compact, and plenty of features makes this finishing nailer something to consider for your next project - from finish molding, crown modeling, or any detail work you can dream of.

The 16 gauge nails offer a cheaper alternative to the standard 15 gauge. And after our testing we didn?t find any major flaws, or have any complaints about the unit. Included with the Dewalt D5125K nail gun is 1000 two inch finish nails. Recommended!

Click here for availability

Dewalt DC 616K
Dewalt DC616K

The Dewalt DC616K XRP Nailer is a compact, portable and versatile tool that is able to combine precise hand nails at a very high speed. Best of all it has a rechargeable 18volt battery and shoots readily. It?s designed to seal out dust cabinet and also has rear load magazines that hold 100nails.

Other features that are associated with this outstanding tool includes it comes with a precise depth control mechanism, a swing open nosepiece, this is important as it used in clearing jams, there?s also a safety contact which serves as a lock off that has the capability of disabling the trigger.

To sum up the popular DEWALT DC 616K XPR is a very versatile nail gun for It?s an ideal tool for trim, cabinetmakers, and others who routinely install baseboard, shoe, crown and chair rail moldings, paneling, hardwood flooring, staircases, and window and door casings and jambs work. It comes with a reversible belt hook, and safety glasses to avoid injury, a one hour charger and a plastic storage case. And of course in addition to that, on purchase you are assured of a 3 year warranty.

Click here for availability

Dewalt dc618k xrp
Dewalt DC618K XRP

The Dewalt DC618K XRP delivers a fair punch. It is an 18 volt cordless 1-1/4 Inch ? 2-1/2 Inch 16 Gauge 20 Degree Angled Finish ?Pneumatic? Nail gun. So this great nailgun hands you the power of a pneumatic nail gun with the convenience of a battery driven cordless nailer hand tool. Very cool!

With a few nice extras such as the LED lighting the Dewalt DC618K XRP Finish Nailer kit is a well respected powerful cordless, battery powered pneumatic finisher nail gun. A few people find that after a lot of all-in-one use it starts to feel a bit heavy. But that perhaps is to be expected since it is robustly built to rapid fire nails home comfortably and smoothly.

Click here for availability

Paslode 900600
Paslode 900600

Paslode?s new offering, the 900600 Finish Nailer is an excellently styled and constructed nailgun. The cordless angled finish nailer can take on any task anywhere with out the hassles of a cord. The Paslode 900600 finish nailer is perfect for homeowners, contractors, and woodworkers alike. The Paslode 900600 nail gun is run on both the included rechargeable battery and fuel cells.

The 900600 finish nailer is a competitively priced option in the cordless finishing nailgun market. Our tests found it to be well built and made out of quality materials. The cordless design is an added bonus, allowing you to complete your work anywhere with out the need for an air compressor. We did have one complaint, the fuel cells are relatively expensive in comparison to some other brands. However, in the end we feel the slight increase in cost is worth the cord free design.

Click here for availability

Paslode 902000 NailerPaslode 902000

A portable rechargeable nail gun the Paslode 902000 ? 16 Gauge Straight Finish Nailer, is an impressive and lightweight (just 4.9 lbs including battery!) piece of kit. Designed for ease of use, while still being powerful and versatile this nailer s ideal for professionals, carpenters, hobbyists and DIY?ers. This versatile nailgun allows for ¾ to 2 ½ inch nails to be used making it ideal for a variety of jobs, from beading to more heavy weight carpentry jobs.

Click here for availability

Paslode T250A F16 ReviewPaslode T250A

The Paslode T250A F16-Gauge Pneumatic Angled Finish Nailer is a pneumatic powered nail gun with all the punch required to get the job done quickly and efficiently. Ideal for the professional but also a great hit with the amateur the Paslode T250A is light and well balanced allowing for day long use without too much stress or strain.

The pneumatic angled finish gun nailer takes nails from 1 ¼ inch up to 2 ½ inch 16 gauge , which is ideal for many carpenter jobs including door jambs, window framing and stair casings and despite its light weight has been constructed to be durable enough for anything a jobsite can throw at it.

Sometimes it?s the little things, such as tool free adjusters that makes the difference between a tool becoming, a favorite much used addition to the tool kit and a ?white elephant? which rarely sees the light of day. The attention to detail with the handling of the nailer, the good balance and light weight, make it very comfortable to use, while still being robust and durable enough to cope with life on the jobsite. The overall design and practicality of the Paslode T250A F16-Gauge Pneumatic Angled Finish Nailer as well as it?s price, makes it a firm favorite with professionals and the DIY?er alike.

Click here for availability

Porter Cable FN250C ReviewPorter Cable FN250C

The Porter-Cable FN250C 1-Inch to 2-1/2-Inch 16-Gauge Finish Nailer, has been designed with the professional in mind. Engineered to be virtually maintenance free, the oil free motor prevents staining of the work area and also provides for a longer life for the motor.

The nailer also features a rear exhaust which blows, any possible contaminates away from the work area, allowing a professional finish every time. The FN250C has all the power you need and is designed to take 1 inch to 2 ½ inch 16 gauge nails, with the punch you need for firm and accurate fixation thanks to the internal piston action, the Porter Cable FN250C nail gun is able to deliver between 70 and 120 PSI.

If you are looking for a nail gun which can offer all the power and punch, while being light weight and easy to use, then the Porter-Cable FN250C Finish Nailer, could be exactly what you are looking for.

Click here for availability


16 Gauge Finish Nailers Reviews

Here are all the 16 gauge finish nailer reviews if you want to visit them separately:

Dewalt D51257K
Dewalt DC616K
Dewalt DC618K XRP
Paslode 900600
Paslode 902000
Paslode T250A
Porter Cable FN250C

Best 18 Gauge Finish Nailer

without doubt the Paslode 901000!


Paslode 901000 Finish Nailer







Are you looking to tackle an outdoor project, maybe put the finishing touches on your kids tree house? The Paslode 901000 finish nailer features a cord free design, perfect for use in even the most remote areas. The Paslode is fuel cell and battery powered, packing enough punch for any finishing job.

Although the cost to use this Paslode 901000 power tool may be a little higher than a traditional ‘pneumatic’ powered nailer, but since it has superior usability that’s to be expected! We really love the cord free design. The hassle free use and convenience to work away from the noisy compressor really sold us. What we found is a high quality tool that you’ll want to own once you

fire it in real life. The 18 gauge nails are virtually invisible as well, and won’t split the wood. Overall this is a great purchase if you like owning quality tools.

Check out the Paslode 901000 here

If you want to read the full Paslode 901000 review click here.


Best 19 Gauge Finish Nailer

It’s a ‘pneumatic’ finish nailer, and the best is the Bostitch FN1664K.

Bostitch FN1664K Finish Nailer







The Bostitch FN1664K 16GA Straight Finish Nailer has been constructed to take on the world while still looking good, with a tough industrial look. Bostitch have built up an excellent reputation for providing tools which meet the challenges, without comprising on safety and ease of use for the consumer. The FN1664K features filtered air inlet, dial-a-depth control for quick countersinking adjustments and a selectable trigger system. With the ability to drive ¾ inch to 2 ½ inch 16 GA nails making it the ideal choice for crown moldings, door jambs, stair casings and other carpentry and cabinetry work.

The Bostitch FN1664K 16GA Straight Finish Nailer is the ideal choice for jobs large and small and with its lightweight construction reduces fatigue and makes it safer for working in difficult areas such as at the top of a ladder. A great choice for the professional or the home owner. This Bostitch FN1664K reviewer gives it a thumbs up!

Check out the Bostitch FN1664k here.

If you want to read the full Bostitch FN1664K 16GA review click here.


Other Best Nailer Comparisons